客服中心
移动版
企业认证 工商信息
0755-29609500
手机查看
使用微信扫码
进入小程序商铺
搜产品
您当前的位置: 首页>产品>宠物园艺>狗狗及用品>狗狗清洁美容工具> 智能自动感应洗手液皂液器台式水槽浴室液晶显示自动洗手液

智能自动感应洗手液皂液器台式水槽浴室液晶显示自动洗手液

举报
产品
智能自动感应洗手液皂液器台式水槽浴室液晶显示自动洗手液
单价
80.00元/台
最小起订
10
供货总量
2000
有效期至
长期有效
微信查看产品&联系供应商
使用微信扫码查看该产品
企业信息
深圳市晨日通科技有限公司
企业认证
成立年份:
2008年
经营模式:
贸易型
企业类型:
企业单位
主营产品:
人体感应灯,LED红外感应灯,LED声控灯,带报警LED感应灯,红外感应开关,LED震动感应灯,七彩感光风火轮,LED感应灯,LED感应楼道灯,人体感应衣柜灯,LED厨柜灯,LED触摸灯,声光控感应灯,LED人体感应门锁灯,220V供电感应灯,IR红外管感应灯
公司地址:
福永镇塘尾村西乡蚝业工业园C栋三楼
联系方式
电话:
0755-29609500
传真:
0755-29609500
手机:
13418656189
QQ:
124825245
邮箱:
yu00018@163.com
地址:
福永镇塘尾村西乡蚝业工业园C栋三楼
产品介绍
有效期至
长期有效
最后更新
2018-06-27 09:07
浏览次数
417


感应洗手液器感应洗手液器感应洗手液器感应洗手液器感应洗手液器






产品容量:300ML,产品尺寸:高20CM,底座尺寸8.3 x16cm,

 

SOAP DISPENSER INSTRUCTIONS

 

Thank you for choosing the products of  xx  company, may it will bring conveniencetoyour future life.

 

FUNCTION INFORMATION:

 

 

“+”  button toadd volume

“-”   button to reduce volume

 

Caution:if press the“-”button more than 5 seconds, then the dispenser will be turned off.  Press 2 seconds to turn on.

  

Power:  AA/1.5V * 3 batteries,  please use alkaline batteries!

 

 

 

LCD display

 

  1. 1. If the battery power in low level, please change to new batteries.
  2. 2. If the liquid in low level, please add liquid soap.

  

 

INSTALATION SHOW

  

INSTRUCTIONS

 

Installation steps

1. Pour the liquid soap into the container, and cover it.

2.Put three "AA" alkaline batteriesinto the battery box, install batteries with the right way according to the chart of the battery box.Assemble the battery box into the soap dispenser.

3.This product can be used directly on the desktop or hander with wall bracket.

 

Use

1.Put the hand near theinductive zone and theliquid will flow out from the outlet.Please run several times until the liquid flow out of the dispenserduringthe first time use,because the soap haven’t flow into the liquid pipe.

2. If necessary pleasemove your hand andrepeat the step 1.

3.Thevolume is adjustable, totally four levels. Use ‘+’ button to add the volume, use ‘-’ button to reduce the volume.

 

 

NOTE AND MAINTENANCE

 

1. Choose an appropriate place to set the soap dispenser, make products protect from damping or touching water.

2.Don\'t put the soap dispenser device on mirror or strongreflectivesurface, don\'t put the soap dispenser deviceunderwater

3. It might affect induction sensitivity when use the soap dispenser under the strong sunlight.

4.  This product is suitable for the liquid concentration is moderately,if the liquid concentration is too high it will result in liquid flowveryslowlyor stoppingflowing.

5.  Please don’t use alcohol or other chemical liquid.

6.  Please don\'t let the dust into soap dispenser, that may jam access point, if you find some dirty or impurity in the container, please change soap liquid.

7.  Please use soap dispenser frequently, if you don’t use it for a long time, the liquid soap may solidification, then please

 pour out the liquid and clean up the soap dispenser.

8. Please add soap when thesoap level indicator is blinking.

 

CLEAN

1.Please take out the batteryandpour out the liquid when don’t use the dispenser,clean up with a rag wipe.

2.Please don’t put the soap dispenser into the water when clean it, that might damage thecircuit board.

  1. 3. Clean soap dispenser’s surface with wet cloth and dry towel butpleaseuse dry towel to clean battery box only.

4. Do not use strong corrosive chemical solvents to clean the products, to avoid the surface be damaged and deformation.                                  

 

COMMONFAULTANDPROCESSING

 

1.If the soap dispenser don’t work

(1)Put your hand near the soap dispenser

(2)Make sure the current have connect.

(3)Check the under surface of the soap dispenser, if there are much light and shadow under the bottom, please move the soap dispenser to the right position.

 (4)  Make sure the surface of the reaction port is clean enough.

 

2.If the soap dispenser don’t flow the liquid

 

(1) If you use it at the first time ,some air may remain in the tubing, please operation the soap dispenser several times.

2May be the soap is not enough, please add the soap.

 (3)   Check the batteries whether have enough power.

  

 

WALL BRACKET INSTALATION:

 

 

中文介绍:

 智能感应洗手液机介绍

      承蒙您选购弊公司的产品,在此谨表示敬意。愿它能给

    你的以后的生活带来方便和快捷,谢谢!

      智能化**洗手体验:

     红外自动感应装置只需靠近感应区域即可自动出皂液,确保每次给皂剂量,

       无需用手按或挤压可能布满细菌的皂液器

      健康的洗手理念:

            自动感应方式有效避免了交叉感染,有助于减少细菌的传播

      时尚高雅设计:

      时尚大方的款式和典雅炫丽的外观适用于家庭、办公室,宾馆、酒店,商场,医院,疗养院,

       福利院等各种场合

 

 

      操作安全简单: 

        安全简单的的操作,只需装上电池或者连接适配器即可开始工作,四档可调根据需要调节出

        液量多少,节约液体,电量少液闪屏报警。

   功能介绍:

  
    “+” 增加出液量档位按钮

         “-”  减少出液量档位按钮

          AAA/1.5V*3节电池AAA

   液晶显示屏如下:

     从左到右依次显示内容是:

      左起**行LIQUD LEVEL为产品出液量显示,共4格4个档位,1格档位出液量最少,

          4格档位出液量**。左起第二行BATTRY LEVEL为产品电池电量显示。

 

      最右边DISPENSER LEVEL为产品内溶液量,4格显示为满溶液量,1格显示时会有闪屏,

     代表溶液量已经很少,需要增加溶液量。

  

 

安装图示

  

   安装步骤:

1.        将产品放置在台面上。

2.             将产品斜放,取开入液口盖,将洗手液倒入洗手液机,并盖好入液口,入液口需要对好位置;

        将防尘盖盖好。装入三节“AA”号碱性电池到电池盒,根据电池盒的图表正确的安装电池。

3.          产品可以直接放置在台面上或者放置在支架上面,手伸下去感应位可以感应到出液。

  

    注意事项与保养:

1.          选择一个适当的位置放置皂液器,请勿使产品受潮、触水。

2.         不要把皂液器放在镜子或反光较强的表面,不要把皂液器放在水下。

3.          在强光下使用皂液器,可能会影响感应灵敏度。

4.          该产品适合浓度适中的液体,液体浓度过高会有出液缓慢或不出液的现象。

5.         不能使用酒精或其他化学液体。

6.         请不要让灰尘掉进肥皂分配器里,这样可能会堵塞通道口,如果你发现容

            器已脏或有杂质,请重新换进肥皂剂。

7.          要经常使用皂液器,如果长时间不用皂液器,液体肥皂剂可能会凝固,请

             倒出皂液,并清洁干净本品。

8.             如果液体肥皂剂还剩几乎1cm时,请加入肥皂剂。

      

       清洁

       (1)    当不用时请倒出里面的液体肥皂剂,用抹布擦干净并拿出下面的电池。

       (2)    请勿把皂液器放进水里清洗,这样会损坏电路板。

      (3)    清洁皂液器表面用湿布和干毛巾,清洁电池盒只能用干毛巾。

      (4)    请勿用强腐蚀性化学溶剂清洁产品,以免造成外观表面损坏、变形。

                                

      使用说明:

1.        伸手靠近感应区,出液口出液(**次使用时由于皂液还没有流入通液管道中,

           请来回运行数次直至出液)  

2                该产品为一次感应,把手放在皂液器的出液口下,皂液将会自动

                   运作一次,如需继续请重复第2步骤。

3                 调节出液量  

                 整机设有4个档位,可以通过“+”“-”档位调解溶液量多少,皂液器开起同默认为第2档。

                 4拔下电池,整机关闭。

     常见故障及处理:

1.       如果皂液器不工作

           (1)   把您的手靠近感应器。 

           (2)   检查是否连接电源。

           (3)   电源电池是否已无电量。

           (4)   检查皂液器的下表面,如果下表面有很多光和倒影,请移动皂液器到适当的位置。

 

2.     如果无皂液滴下或者出现气泡现象

       (1)   如果**次使用,在输液管里有残留的空气,请运作皂液器数次。

        (2)   在冬天气温较低时,液体有可能会凝结,,运行皂液器数次即可。

        (3)    可能皂液不够,请添加皂液。 

    

免责声明:当前页为 智能自动感应洗手液皂液器台式水槽浴室液晶显示自动洗手液产品信息展示页,该页所展示的 智能自动感应洗手液皂液器台式水槽浴室液晶显示自动洗手液产品信息及价格等相关信息均有企业自行发布与提供, 智能自动感应洗手液皂液器台式水槽浴室液晶显示自动洗手液产品真实性、准确性、合法性由店铺所有企业完全负责。世界工厂网对此不承担任何保证责任,亦不涉及用户间因交易而产生的法律关系及法律纠纷,纠纷由会员自行协商解决。

友情提醒:世界工厂网仅作为用户寻找交易对象,就货物和服务的交易进行协商,以及获取各类与贸易相关的服务信息的渠道。为避免产生购买风险,建议您在购买相关产品前务必确认供应商资质及产品质量。过低的价格、夸张的描述、私人银行账户等都有可能是虚假信息,请您谨慎对待,谨防欺诈,对于任何付款行为请您慎重抉择。

投诉方式:fawu@gongchang.com是处理侵权投诉的专用邮箱,在您的合法权益受到侵害时,请将您真实身份信息及受到侵权的初步证据发送到该邮箱,我们会在5个工作日内给您答复,感谢您对世界工厂网的关注与支持!

工商信息*以下内容来自第三方启信宝提供
法定代表人
徐丽玲
经营状态
存续
注册资本
50 万人民币
实缴资本
-
统一社会信用代码
91440300326283928G
组织机构代码
326283928
企业注册号
440306111941150
企业类型
有限责任公司
登记机关
深圳市市场监督管理局
成立日期
2014年12月26日
营业期限
2014年12月26日--2064年12月26日
核准日期
2021年04月19日
注册地址
深圳市宝安区松岗街道红星社区红星国际新城一期1-17C
经营范围
一般经营项目是:小家电的技术研发;LED照明、电子产品以及电子材料、电子周边产品的销售;国内贸易,货物及技术进出口。,许可经营项目是:LED照明、电子产品以及电子材料、电子周边产品、小家电的生产。