AGF 奥广飞 ARX-482R 全新内置天线4通道FHSS制式2.4G立式接收机

Specification

Operating Voltage：3.5V～8.4V

Dimension： 23.6×18.4×28.4mm

Weight：7.3g 

No. Of Channels：4CH

PWM Mode：Normal/ SHR/ SSR

Compatibility

Compatible with SANWA FH3/FH4T remote control system.

Suitable for remote control M12, M11X, EXZES X, MT-4, GEMINI X, MT-S, MT-4S, M12S, M17.

Feature

1) Bidirectional communication system, monitor the receiver voltage by transmitter in real time;

2) Compatible stabilizing voltage, operating voltage can up to 1-2s lipo, sudden low voltage won’t be  

out of control;

3) High sensitivity built-in antenna, full 4CH output + BAT port suitable for all kinds of remote control cars, simulation rock crawlers.

4) L-shape design, small size to save more space for rc car.

Bind Procedure

1) Turn on the transmitter, get to the SYSTEM menu and select BIND;

2) Pressing the "SET" button of receiver and power on, the LED on the receiver will flash slowly. Press and hold the “SET” button for 2 seconds then release, the LED on the receiver will keep flashing slowly;

3) Select BIND menu in the transmitter and press ENTER while the LED on the receiver is flashing slowly. The LED will be off immediately.

4) Press ENTER again on the transmitter, the LED will be solid, indicating binding process is successful;

5) Please repeat the above procedure if binding is failed.

AGF 奥广飞 ARX-482R 全新内置天线4通道FHSS制式2.4G立式接收机

产品特点

1) 双向通信系统，遥控器上实时监控接收器电压。

2) 集成电源稳定电路，使用电压可至1S-2S LiPo，瞬时低压不失控。

3) 高灵敏度内置天线接收，全通道4CH输出+BAT接口，适用各种遥控赛车、仿真攀爬车。

4) T型外壳设计，小安装位置更节省遥控车空间。

产品介绍

1.1兼容系统：

兼容SANWA FH3/FH4T遥控系统。

适用于M12, M11X, EXZES X, MT-4,GEMINI X,MT-S, MT-4S, M12S ,M17等遥控器。 

1.2技术参数：

工作电压：3.5V～8.4V

尺寸：   23.6×18.4×28.4mm

重量：   7.3g

输出通道：4CH

PWM模式：正常（Normal）/高速（SHR）/超高速（SSR）

连接图

使用说明

1.1 对码说明：

1)打开遥控器进入SYSTEM（系统）菜单，移动光标选中BIND（对频）功能。

2)先按住接收机SET按钮然后通电，接收机指示灯开始慢闪，约2秒后释放按钮，指示灯持续慢闪状态。

3)接收机指示灯慢闪状态下，遥控器屏幕光标在BIND状态时按下ENTER（确认），接收机指示灯快闪随即熄灭。

4)遥控器再次按下ENTER（确认），此时接收机指示灯长亮，对频成功。

5)如果对频失败请重复以上步骤。

2.2 LED状态：