金科JK830-2一体式全液压潜孔钻机中英文参数
JK830-2一体式全液压潜孔钻机是一款可以为您带来更高自动化、更高钻进效率的产品,运行可靠,操作简单。标配有满足 FOPS 要求的驾驶室和自动换杆系统,加宽重型行走机构,在满足**移动的同时兼顾更好的安全性,液压除尘系统可满足矿山的-新的环保要求,是现代绿色矿山开采的可靠解决方案。JK830-2 is an Al - In - One hydraulic DTH drilling rig , which brings you more automation , higher working eficiency , better reliability and simpler operation . The FOPS - approved cabin and automatic pipe handling system come standard . Heavy - duty undercarriage with wide tracks ensures both extreme maneuverability and improved safety . The hydraulic dust collecting system meets the latest environmental protection regulations and it ' s a reliable solution to realize the modern green mining .
主要特点全自动钻进,单人操作进口 Rexroth (力士乐)+ Eaton (伊顿)液压控制单元保证扭矩输出强劲,满足各种中大孔径需求可伸缩重型钻臂,提供更大的扇形钻孔面积,提高有效钻进时间柴油机动力充足,冲击力、推进和回转速度可根据岩层的硬度等地质条件做无级调整,适合多种复杂岩层以及地形要求配置 Atlas · Copco 2级进口机载空压机,进尺效率高,而且成孔质量更好
Automatic drilling , single operator imported Rexroth and Eaton hydraulic control unit ensures strong torque output to meet large hole driling needs Extendable heavy - duty boom has a large drilling coverage to increase working efficiency The diesel engine ofers strong power . Impacting , feeding and rotating rate can be variably adjusted to suit diferent rock formations imported Airman two - stage air compressor can switch between two compression stages , increases penetration rate and hole quality
回转机构配有浮动接头,可以起到减振作用,同时在接卸钻杆时保护钻杆螺纹。使用寿命长,调整方便。
The rotation unit is equipped with a floating connector which can reduce vibration as wel as protect pipe threads when loading / unloading drill pipes . It's easily adjusted and has a long service life .
采用伸缩式重型液压钻臂,扩大了钻孔的工作范围。三自由度多向定位的钻臂结构,实现全方位的凿岩角度覆盖。
The extendable heavy - duty boom ensures a larger driling coverage . The boom structure has three degrees of freedom to ensure a wider range of driling angles .
采用满足国三阶段排放标准的大功率电喷发动机,动力充足,转场迅捷,油耗更低,同时保证发动机的使用寿命。 Atlas · Copco 高压空气压缩机,冲击力强劲(采用中高压和高压两段式压力设计,节约能耗同时保证各种工况的使用)
The powerful EFI Cummins diesel engine is rated at 335kW with lower fuel consumption and meets the National Il emission standard . The imported Airman air compressor from Japan offers strong flushing power ( two - stage compression design , better fuel efficiency and solid performance in any working situations .
JK830-2潜孔钻机技术参数 J830-2 Technical specifications 高效+坚固+便捷+安全 | |||
车体规格General | |||
总质量 | Weight | kg | 25000 |
全长全宽全高 | Length*Width*Height | mm | 9785*3200*3500 |
底盘Undercarriage | |||
履带全长 | Track length | mm | 3646 |
接地长度 | Ground contat lengh | mm | 2875 |
履帶中心距 | Track center distance | mm | 2200 (外侧总宽2700) |
履带宽 | Track width | mm | 500 |
离地间隙 | Ground clearance | mm | ≥400 |
履带架摆动角 | Track oscillaion | ° | ±10 |
行走马达 | Walking motor | 伊顿Eaton | |
行走速度 | Walking speed | km/h | 2(低速) 3(高速) |
Max牵引力 | Max. tracive force | KN | 170 |
爬坡度 | Grade ability | ° | 20 |
发动机 Engine | |||
型号 | Model | QSZ13-C450-30(康明斯) | |
形式 | Type | 水冷6缸电喷柴油机 Water-cooled six-cylinder EFI diesel engine | |
额定功率 | Rated power | Kw/rpm | 335/2100 |
燃油箱容量 | Fuel tank capacity | L | 760 |
液压系/阀 Hydraulic pump/valve | |||
主泵 | Main pump | 柱塞变量负载敏感泵 | |
主阀 | Main vave | 负载敏感阀 | |
厂家 | Manulacturer | Rexroth力士乐 | |
空压机 Air compressor | |||
型号 | Model | Atlas Copco | |
形式 | Type | 2级螺杆空压机(双功况) | |
压力 | Working pressure | bar | 24 |
输出流量 | Max. air delivery | m³/min | 30 |
回转马达 Rotary motor | |||
液压回转头 | Hydraulic rolation unt | 双马达( Eaton伊顿) | |
回转連度 | Rotation rale | rpm | 0-70 |
扭矩MAX | Max. rotation torque | Nm | 3900 |
推进方式 | Feeding method | 马达驱动行星减速箱+链轮链条型式 | |
快推进MAX提升速度 | Fast feden/ting fale | ml min | 30 |
慢推进Max推进速度 | Feeding rate | m/ min | 4.7 |
慢推进Max提升速度 | Max. Hiting rate | m/ min | 5.5 |
推进力 | Feeding force | KN | 0-30可调 |
提升力 | Lifting force | KN | 30 |
推进梁 Feed | |||
推进梁总长 | Length | mm | 8500 |
推进行程 | Feeding stroke | mm | 5500 |
推进补偿 | Feed extension | mm | 1600 |
回转角度 | Swing angle | 左边95右边35 | |
臂架Boom | |||
臂架型式 | Type | mm | 带伸缩单直臂(长度570) |
臂架举开角度 | Tit angle | ° | 40(上),15(F) |
摆动角度 | Swing angle | ° | 左边(驾驶室侧) 9右边31 |
钻杆储杆器Drill pipe changer | |||
钻杆直径 | Pipe diameter | mm | 102/114 |
钻杆长度 | Pipe length | m | 5 |
钻孔直径 | Driling diameter | mm | φ138- 235 |
钻孔深度 | Diting depth | m | 30 |
储杆能力 | Pipe capacily | 支 | 5+1 |
冲击器规格 | Hammer specs | 5"/6"/7" | |
除尘器Dust collector | |||
滤芯数量 | Filter element | 26 | |
除尘方式 | Collecting method | 全液压除尘 | |
集尘罩 | Dust cover | 上下浮动 | |
JK830-2可以根据客户的实际使用情况进行功能定制。 |
免责声明:当前页为 金科JK830-2一体式全液压潜孔钻机中英文参数底价多少产品信息展示页,该页所展示的 金科JK830-2一体式全液压潜孔钻机中英文参数底价多少产品信息及价格等相关信息均有企业自行发布与提供, 金科JK830-2一体式全液压潜孔钻机中英文参数底价多少产品真实性、准确性、合法性由店铺所有企业完全负责。世界工厂网对此不承担任何保证责任,亦不涉及用户间因交易而产生的法律关系及法律纠纷,纠纷由会员自行协商解决。
友情提醒:世界工厂网仅作为用户寻找交易对象,就货物和服务的交易进行协商,以及获取各类与贸易相关的服务信息的渠道。为避免产生购买风险,建议您在购买相关产品前务必确认供应商资质及产品质量。过低的价格、夸张的描述、私人银行账户等都有可能是虚假信息,请您谨慎对待,谨防欺诈,对于任何付款行为请您慎重抉择。
投诉方式:fawu@gongchang.com是处理侵权投诉的专用邮箱,在您的合法权益受到侵害时,请将您真实身份信息及受到侵权的初步证据发送到该邮箱,我们会在5个工作日内给您答复,感谢您对世界工厂网的关注与支持!