GRUN镶嵌润滑轴承铜套

GRUN品牌镶嵌润滑轴承铜套是嘉兴固润轴承公司生产的具有自润滑、耐磨、耐高温等优点的铜基滑动轴承产品。既有传统铜套类产品的承载性能、耐磨性能和保护轴不受磨损的特点，又有在无油条件下能利用镶嵌于基体的润滑剂起到润滑作用，同等条件下寿命远远高于传统铜套。

目前已广泛运用于冶金连铸造机，列车支架、轧钢设备、矿山机械、船舶、气轮机等高温、高载、低速重载等场合使用。

基体材质:CuZn24AL6
等铜合金
基体硬度:HB230-270
摩擦系数:<0.16
**使用温度:300
~400℃
极限动载荷:100N/mm2
lm/min的极限载荷:25N/mm2
**滑动速度:干0.4m/s油5m/s
使用极限PV值:3.8N/mm2*m/s

JDB soildlubricant
embedded bushing is a new type made from strong brass andhomogeneously embedded
with solid lubricant in its body. It breaks through the limit ofgeneral bearing
whose lubrication depends on oil film,So heavy duty, anticorrosion,or where oil
is hard to be introduced .lts performance doubles both on hardnessand
wear-friction. It is now widely applied in successive castingmachines,mineral
machine,ships,turbogenerators,hydraulic turbines and injectionmolding machines
etc.

Base material:CuZn24AL6etc
Base
Hardness:HB230-270
Friction coef(u):<0.16
Temperature limit :300
~400℃
Dynamic load limit:100N/mm2
lLoad limitunder
lm/min:25N/mm2
Speedlimit:(Dry)0.4m/s
(Oil)5m/s
PV limit:3.8N/mm2*m/s