南澳电气 NADCC大电流导线 铜焊联接

NADCC大电流导线主要用作电流互感器检定时的穿心导线，也可在其它大电流实验中使用。我公司大电流导线由导线和接线端两部分组成，铜焊联接，导线芯用多股铜丝绕制，每股直径为0.1mm；表皮为锦纶编织的绝缘保护套，其中10-50A为单层，100-3000A为双层。导线的长度和接线端的形式可按用户要求加工。具有外形美观、安全可靠、质地柔软、耐磨耐高温等特点。大电流导线电流密度为5A每平方毫米，额定电压为660V。

产品别名 

大电流导线,电流导线,电流实验导线

产品特性

1、具有做工精细、外形美观、安全可靠

2、质地柔软、耐磨耐高温等特点

产品参数

注：其它规格可根据客户需求订做

Product introduction 

NADCC large current conductor current transformer, mainly used as the feed through wire test, but also in other highcurrentexperiments. Consist of the wire and terminal two parts, brazing joint, multi-strand copper wire core wound with a share diameter of 0.1mm; epidermis woven nylon insulated protective sleeve,which isa single 10-50A layer,100-3000A for the double. Length of the wire and terminal in the form of user requirements can be processed. With beautiful appearance, safe and reliable, soft,high-temperatureresistant characteristics. Large current conductor current density of 5A per square millimeter, rated voltage of 660V.

Also called name

Large current conductor, the current conductor, the current experiment leads

The Characteristics of the products

1, Fine workmanship, beautiful appearance, safe and reliable

2, Soft, wear-resistant high temperature and other characteristics

The parameters of the products

Note: other current can manufacture for user if require