芳纶无石棉垫片，环保耐油橡胶垫片，非石棉垫片，klinger克林格垫片厂家批发

亚联密封系列无石棉板材由高强度芳纶纤维、高碳纤维耐油橡胶、填充料、着色剂等物质在高温高压下滚压而成，是石棉橡胶板的理想代替品。
TDS non-asbestos sheet is made from Kevla fibre, carbon fiber synthetic rubber, filling material and dye, compressed and calendered under high temperature and pressure into a sheet form. It eliminates asbestos-rubber sheet essentially and thoroughly.

型号 style 产品名称Products Products
TD-2200 无石棉板材 低压 Non-asbestos sheet(200)
TD-2300 无石棉板材 中压 Non-asbestos sheet(300)
TD-2400 无石棉板材 高压 Non-asbestos sheet(400)
TD-2400M 夹钢丝增强无石棉板材 Non-asbestos sheet with Wire mesh
TD-2400MG 涂石墨夹钢丝无石棉板材 Wire mesh reinforced Non-asbestos sheet with graphite coating
TD-2200N 耐油无石棉板材 低压 Oil-resisting non-asbestos sheet(200)
TD-2300N 耐油无石棉板材 中压 Oil-resisting non-asbestos sheet(300)
TD-2400N 耐油无石棉板材 高压 Oil-resisting non-asbestos sheet(350)
TD-3500 通用型芳纶纤维板材 Universal Aramid fiber sheet
TD-3501 芳纶纤维合成船舶垫片板材 Aramid fibers sheet used in ship 
TD-3502 芳纶纤维合成压缩机垫片板材 Aramid fibers sheet used in compressor 
TD-4500 通用型碳纤维合成板材 Universal carbon fiber sheet
TD-2100 无石棉抄取板 Non-asbestos beater sheet
TD-2100I 齿板增强无石棉板 Non-asbestos beater sheet reinforced with tanged carbon steel
TD-2100DI 双面齿板增强无石棉板 Non-asbestos Exhaust Gasket sheet with doubel-face tanged CS

指标及应用：
型号 style 2200 2300 2400 2400M 2400MG 2200N 2300N 2400N 3500 3502 4500 2100
抗拉强度
Tensile strength Mpa 6 9 12.5 25 25 8 11 12 11 11 10 3
吸油率Oil absorption≤ % 15 15 18 15 15 15 15 18 18
增厚率Thickness increase % 16 16 20 16 16 16 16 20 20
压缩率Compressibility≥% 12±5 12±5 12±5 12±5 12±5 12±5 12±5 12±5 12±5 12±5 12±5 12±5
回弹率Recovery≥% 45 45 45 45 45 45 45 45 46 46 45 40
密度Density g/cm3 1.9 1.9 1.9 2.2 2.2 1.9 1.9 1.9 1.8 1.8 1.7 0.5
温度Tmax: ℃ 200 300 400 450 450 200 300 400 350 350 400 350
压力Pmax: Mpa 1.5 3.0 5.0 11.0 11.0 2.0 3.0 3.5 4.5 4.0 4.0 3.0
适用介质Resistanceto media 水，蒸汽，盐类
Water, steam, salt
高温，高压蒸汽
High temperature, high-pressure steam
水，蒸汽，油类，溶剂
Water, steam, oil, solvents 海水，蒸汽，油类，溶剂
Sea water, steam, oils, solvents

供应尺寸 SiZE
1500*2000*0.5-6MM 1500*1500*0.5-6MM 1500*4000*0.5-6MM 1000*1500*0.5-6MM
2700*3800*0.5-6MM 1270*3810*0.5-6MM