HW230EW产品优势 |HW230EW Product Advantage
* 全数字IGBT控制技术，电弧控制稳定、焊缝成形好，飞溅小。
* 辅助电220V2KW50Hz输出,焊接工作时可同时带水泵、角磨机、砂轮、照明灯等工具。
* 无刷、诱导子发电技术，发电机同时输出两个发电绕组，相互独立，互不影响。焊机持续作业能力强，可以做到人停机不停24小时连续作业，电效率高。
* 用于野外施工、适用多种焊条，可以出色施行纤维素焊条、低氢焊条及氩弧焊的全位置焊接。
* Full digital IGBT control technology, stable arc control, good weld shape and small spatter.
* Auxiliary electricity 220V 2KW 50Hz output, welding work can be accompanied by water pump, angle grinder, grinding wheel, lighting and other tools.
* Brushless and inducer power generation technology, the generator outputs two power generation windings at the same time, which are independent of each other and do not affect each other. The welding machine has strong continuous wo*ng ability, which can make people stop wo*ng continuously for 24 hours, and the electric efficiency is high.
* Used for field construction, suitable for a variety of electrodes, can be excellent implementation of cellulose electrode, low hydrogen electrode and argon arc welding all-position welding.
HW230EW性能参数配置/Specification of HW230EW
碳刷/Brush
无/No
驱动方式/Driven
直接耦合/Direct coupling
防护等级/Protection class
IP23S
绝缘等级/Insulation class
H
焊接输出/Descending Output
额定功率/Rated power
5.6 KW
额定电流/Rated current
200 DCA
额定电压/Rated voltage
28 DCV
空载电压/Idle voltage
90 DCV
暂载率/Rated duty cycle
50%
焊接电流调节范围/Current range control
（45-230）DCA
焊条直径/Applicable electrode
2.0-5.0 mm
辅助电输出/Accessorial Receptacle
额定功率/Rated power
2.0 KW
额定电压/Rated voltage
220 ACV
辅助电额定电流/Rated current
9.1 A
暂载率/Rated duty cycle
****
发动机/Engine
型号/Model
三菱/MITSUBISHI GT1300
类型/Type
四冲程单缸/4-stroke, 1-cylinder
排气量/Displacement
391 CC
额定功率/Rated output power
13 HP
额定转速/Rated speed
3600 rpm
启动方式/Starting system
手启动/Recoil
燃料/Fuel
无铅汽油/Unleaded gasoline
冷却方式/Cooling system
风冷/Air cooling
其它/Others
油箱容量/Fuel tank capacity
12 L
外形尺寸/Dimension (L×W×H)
707×530×560 mm
重量/Net weight
98 Kg
车轮/Wheel kit
选配/option
