电池温度循环试验箱PSL-225-3-3 Lab Companion

型号 Model

PSL-150-3-3

PSL-225-3-3

PSL-408-4-4

PSL-800-6-6

PSL-1000-6-6

测试空间

Testing space

W500xH600xD500 mm

W500xH750xD600 mm

W600xH850xD800 mm

W1000xH1000xD800 mm

W1000xH1000xD1000mm

外形尺寸

External size

冷却方式

Cooling method

风冷式Air-cooled

风冷式Air-cooled

风冷式Air-cooled

风冷式Water-cooled

风冷式Water-cooled

总功率

8KW

10KW

13KW

30KW

32KW

温度范围Temperature range

-70℃至+150℃（可调）

湿度范围

Humidity range

20%RH-98%RH (限定温段,见区域图)

温度波动度Temperature fluctuation

±0.5℃

湿度波动度

Humidity fluctuation

±2％RH

温度偏差Temperature deviation

≤2.0℃

湿度偏差

Humidity deviation

A)>75%RH:≤+2,-3%RH，B)<75%RH:≤±5%RH。

温度均匀度Temperature uniformity

≤±2.0℃

湿度均匀度

Humidity uniformity

+2,-3%RH

升温速率

Heating rate

5.0℃/MIN(从-40℃升至85℃ ,全程平均非线性，空载) 

From -40℃ to 85℃，full range non-linear average about5℃/mins，no load

降温时间

Cooling rate  

5.0℃/MIN(从85℃降至-40℃ 全程平均非线性，空载)    

From 80℃to -40℃ ,full range non-linear average about5℃/mins，no load

升降温过冲Temperature overshoot

≤±2℃

内箱材质

Internal material

采用厚度为1.2mm的SUS#304耐热耐寒不锈钢密封焊接。

Inner chamber with 1.2mm thick SUS#304 high &low temperature resistance stainless steel.

外箱材质

External material

采用镀锌板双面静电树脂高温喷塑。Adopt flame retardant high strength PU Polyurethane foam insulation material.

控制方式

Control Method

P100触摸屏可程式控制PLC、带USB接口、带RJ485接口可连接电脑控制，专用的网络控制软件，方便远程监控，数据采集Touch screen programmable PLC, with USB interface, with RJ485 interface can be connected to computer controlling, special network control software, convenient remote monitoring, data acquisitioning.

压缩机

Compressor

全密式空冷式复跌制冷法国泰康压缩机或半封闭式空冷式复迭制冷德国博客压缩机Tecumseh (France)-fully air-cooled double-fall cooling compressor. Or Bock (Germany) semi-enclosed air-cooled refrigeration.

**防护装置Safeguard device

防爆泄压装置，防爆链，手机报警装置，联网，排烟装置，灭火装置等

Explosion-proof pressure relief device, explosion-proof chain, mobile phone alarm device, networking, smoke exhaust device, fire extinguishing device, etc.